The Zeroplus Logic Analyzer
Installation Guide
The Zeroplus Logic Analyzer Installation Guide
Page 14
2.2 Hardware
Installation
Hardware installation simply involves connecting the Logic Analyzer to your
computer with the included USB Cable as shown in Figures 2-4 and 2-5.
Fig. 2-1
Fig. 2-2
Fig. 2-3
1. Plug the fixed end of the cables into
the LA (Fig.2-1).
2. Plug the loose ends into the
connectors on the circuit board to be
analyzed (Fig.2-2).
Note:
The following sequence must be
observed when connecting the
connectors into the circuit board: A0 =
Brown, A1 = Red, A2=Orange and so on.
3. The circuit board must be grounded to
the Logic Analyzer with the connecting
cables (Fig.2-3).
Step 1 - Plug the thin male end of the USB cable into the laptop or PC.
Step 2 - Plug the square female end into the logic analyzer.
Summary of Contents for LAP-321000U-A
Page 1: ......
