PULSAR
®
PLUS III-S, III-S6, and VI-S SUCTION BLAST CABINETS
Page 27
© 2021 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 30421
7.1.4
Place the smooth side of the strap over the
attached glove. Insert the strap end through the buckle
and pull the strap taut. While keeping the strap taut,
fasten the straps by pressing the hook end into the loop
material.
Figure 31
7.2
Quick-Change Gloves and Glove Mounts
Figure 32
7.2.1
Some operators prefer to have gloves assigned
to them and remove them after their shifts. The quick-
change glove ports provide fast changeover of gloves
and armrest-glove mounts.
7.2.2
Attach gloves to the glove mounts, as noted in
Section 7.1.
7.2.3
Unlock the glove mounts and gloves from the
attachment rings by turning them counterclockwise.
7.2.4
Remove the glove mount and glove from the
cabinet by pulling the gloves through the glove ports.
7.2.5
To reattach the glove mount and glove, place
arms into the replacement gloves and insert both gloves
through both glove ports.
7.2.6
Align the slots in the glove mount with the
shoulder screw heads on the attachment ring, push in on
the glove mount, and then turn it clockwise to lock it.
Figure 32
7.3
BNP
®
Gun Assembly ‒ Figure 33
7.3.1
Replace the nozzle when its orifice diameter has
worn 1/16" larger than its original size or when suction
diminishes noticeably. To change the nozzle, unscrew
the holding nut from the gun end and pull the nozzle
from the gun. Inspect the nozzle O-ring and replace if
worn or damaged. Insert a new O-ring and nozzle,
placing the tapered end toward the jet. Screw the
holding nut onto the gun.
Figure 33
The wider, tapered
end of the nozzle
inserts into the gun.
Wide End
O-Ring
Media Hose
Air Jet Cover
Nozzle
Nozzle Holding Nut
Air Hose
Mounting screws and slots as viewed from outside of the cabinet.
Mounting screws and slots as viewed from inside of the cabinet.
Shoulder Screw Head
Shoulder Screw Slot
Shoulder Screw Slot
Shoulder Screw Head
Armrest-Glove Mount
Attachment Ring
Armrest-
Glove Mount
Glove Mount Attachment Ring
Armrest-
Glove Mount
Hook and Loop Strap
Gauntlet end of glove.
Glove and Gauntlet Attached
