Zero COMANDO 24, User Manual And Configuration

Page: 8 / 16

PG8
ZCOMV24 |CONTROL PANEL | COMANDO 24V
LED COLOR FUNCTION DESCRIPTION
L01 RED Comes on when the PEDESTRIAN start command is activated and goes off when released.
L02 RED Comes on when the START command is activated and goes off when released.
L03 RED Always on. Goes off when the photocell is intercepted interrupting the PHOTO beam.
L04 RED Comes on when SAFETY EDGE is activated and while programming.
L05 RED Comes on when the STOP command is activated and goes off when released.
L06 RED Always on. Goes off when the CLOSING LIMIT SWITCH of motor is reached.
L07 RED Always on. Goes off when the OPENING LIMIT SWITCH of motor is reached
CODE RED Blinking when wrongly configured.
DIP 1
ON
WORKING LOGIC: STEP BY STEP WITH AUTOMATIC CLOSURE
(for other configuration see the DIP SWICH paragraph)
OFF
DIP 2
ON
OFF
DIP 3
ON GATE PAUSE BEFORE CLOSING 60 SECOND
OFF GATE PAUSE BEFORE CLOSING 15 SECOND
DIP 4
ON SOFT STOP ENABLED
OFF SOFT STOP DISABLED
DIP 5
ON BLINK 2 SECONDOS BEFORE OPENING ENABLED
OFF BLINK 2 SECONDOS BEFORE OPENING DISABLED
DIP 6
ON ANTI-CRUSHING FUNCTION DIFFERENT SENSIVITY WHILE OPENING AND CLOSING (GARAGE DOORS)
OFF SAME SENSIVITY FOR ANTI CRUSHING FUNCTION (SLIDING GATES)
DIP 7
ON AUTOMATIC CLOSING AFTER PHOTOCELLS ARE INTERRUPTED ENABLED
OFF AUTOMATIC CLOSING AFTER PHOTOCELLS ARE INTERRUPTED DISABLED
DIP 8
ON PHOTOCELLS READING ENABLED
OFF PHOTOCELLS READING DISABLED
DIP 9
ON STOP BUTTON READING ENABLED
OFF STOP BUTTON READING DISABLED
DIP 10
ON SAFETY EDGES READING ENABLED
OFF SAFETY EDGES READING DISABLED
LED DESCRIPTIONS
DIP SWITCH DEFAULT (FACTORY) SETTINGS
The default settings are highlighted in the boxes with grey background.