BNP-160 TUMBLE BASKET BLAST CABINET
Page 18
© 2018 CLEMCO INDUSTRIES CORP.
www.clemcoindustries.com
Manual No. 25993 Rev B 05/18
8.3 Basket and Drive Assembly
‒
Figure 20
Item Description
Stock No.
1. Basket assembly, includes item 19
Standard, with 3/16" diameter holes .......... 12230
Optional, with 1/16" diameter holes ............ 18254
2. Shaft, basket drive, includes items 13 & 14 .. 25732
3. Grommet, rubber .......................................... 11798
4. Bearing, 3/4" bore, each ................................ 11521
5. Bracket, drive motor mount ........................... 25842
6. Motor, speed reduced, 3/8" shaft .................. 25864
7. Bolt and nut, 1/4" NC x 3/4" elevator ............ 03119
8. Washer, #10 flat (between motor and brkt) ... 03303
9. Cap screw, 1/4" NC x 1" ............................... 03053
10. Washer 1/4" lock ........................................... 03117
11. Nut, 1/4" NC hex ........................................... 03111
12. Screw, #10 x 1/2" truss ................................. 12062
13. Roll pin, 1/4" x 1" .......................................... 12815
14. Screw, 1/4" NC x 3/16" set, each (2-req.) .... 25871
15. Cover, motor ................................................. 25879
16. Strain relief, Nylon snap-in ........................... 13936
17. Screw, 10 x 3/4" self-drilling ......................... 12722
18. Collar, split, shown for reference
Refer to Section 8.7 for pulse parts .............. 25866
19. Liner, 1/4" blue urethane bottom (current)
for use with baskets with 5" opening ......... 28158
** Liner, 1/8" black Neoprene bottom
for use with baskets with 7" opening ......... 24972
**For replacement only; cannot be used with current
basket design with 5" dimeter opening.
Figure 20
1
2
3
4
17
7
10
11
9*
9*
13
14
15
6
4
5
8
16
12
7
10
18
19
* All of Item 9 are installed from inside the cabinet.
