Zero Motorcycles XU 2012, Owner'S Manual

Page: 96 / 142

5-21
Cleaning
To prolong the life of your motorcycle, it should be
washed periodically. Regular cleaning, using correct
methods, is an important factor in maintaining the
value of your Zero motorcycle. It also ensures that
safety-relevant parts remain in full working order.
CAUTION: After cleaning and before starting on your
journey, always test the brakes.
If tar, bugs, or other similar deposits have
accumulated, wash them off as soon as possible.
Do not use steam cleaners; they can cause water
intrusion of bearing, seals and electrical components.
When using pressure washers, avoid spraying water
of great force around the instrument panel, power
pack or controller. Avoid using strong acidic wheel
cleaners, especially on spoked wheels. If such
products are used on hard to remove dirt, do not
leave the cleaner on the affected area any longer
than instructed. Thoroughly rinse the area off with
water, immediately dry it, and then apply a corrosion
protection spray.
WARNING: Improper cleaning can damage electrical
components, cowlings, panels and other plastic parts.
Use only a soft, clean cloth or sponge with mild
detergent and water to clean plastic.
Do not use any harsh chemical products on plastic
parts. Be sure to avoid using cloths or sponges
which have been in contact with strong abrasive
cleaning products, solvents or thinner, fuel (gasoline),
rust removers or inhibitors, brake fluid, antifreeze or
electrolyte.
After gently washing the motorcycle be sure to allow
all of the electrical components to dry prior to
operation. If the motorcycle is ridden immediately after
being washed, apply both brakes several times in
order to remove any moisture from the brake pads.
Do not use products such as tire dressings on tires
as this will deteriorate traction.