Zero Motorcycles XU 2012, Owner'S Manual

Page: 41 / 142

3-14
B. High Beam Indicator
When the headlight high beam is
on, this indicator will illuminate
blue and will remain on until the
high beam is turned off.
C. Main Power Indicator
The main power indicator is ON any time the key
is in the ON position.
D. System Warning Indicator
This indicator will blink when a
system error has been detected.
See System Warning Indicator on
page 6-11 for more information.
Indicators E. Temperature Lamp
This will flash in the event that
you exceed the motorcycle’s
performance capabilities. The
temperature warning lamp
indicates the temperature of the
motor and power pack. See
Temperature Indicator on page 6-14 for more
information.
G. Select Button
By pressing the select button you can toggle between
Ride Time and Total Hours displayed.
H. Adjust Button
By pressing the adjust button you can toggle
between the odometer, trip odometer setting A, trip
odometer setting B, RPM, and Max. Holding it down
will clear the trip odometer resetting it back to zero.
I. Display Area
The backlit digital display displays the following: Ride
Time, Total Hours, Odometer, Trip Odometer, RPM,
and Motorcycle Speed.
J. Charge Indicator
This displays the amount of energy remaining in the
power pack, similar to the fuel gauge on a gasoline
powered vehicle.
A. and F. Turn Signals
An arrow on the instrument panel
will flash green in the same
direction as selected by the turn
signal switch. This will remain
on until the turn signal request
has been canceled.