Zero Motorcycles XU 2012, Owner'S Manual, Page: 68 / 142

4-19
5. Always connect the charger(s) to a GROUNDED
outlet. When using an extension cord, avoid
excessive voltage drops by using a grounded,
3-wire, 12-AWG cord no longer than 7.6 m (25 ft).
The charger can be used on 120 V AC or 240 V
AC current. The voltage does not change the
amount of time that the motorcycle takes to charge.
Note: AVOID connecting the Zero charger and another
device to a single 120 V AC 15A/20A circuit, as it may
become overloaded. Zero chargers draw as much as
10 amps from the 120 V AC circuit when charging.
6. Quick charging to 100% from a fully discharged
power pack takes about 2 hours. When the power
pack is fully charged, disconnect the power cord
from the chargers. Disconnect the stand-alone
charger connector and install the protective cover.
7. Snap the charger power cord back into the clip to
protect it from the elements.