Zero Motorcycles XU 2012, Owner'S Manual

Page: 118 / 142

6-9
The Low Power Pack warning will flash continuously
until either (1) the motorcycle is turned off, or (2) the
throttle control is disabled for any reason, which
includes the power pack being completely empty. The
Low Power Pack warning will flash and you can still
ride the motorcycle, but the remaining range is
limited. It means: “Stop at a destination and charge-
up.”
The solution is to recharge the power pack. If the
Low Power Pack warning beep still sounds after the
power pack has charged for two hours, contact your
dealer. Your power pack may need to be repaired or
replaced.
Other Error-Flash Patterns
If the BMS in your power pack produces an error-code
which is not described in Understanding BMS Flash
Code Patterns, then the power pack has encountered
a serious internal hardware problem and must be
repaired or replaced by a dealer.
It is possible to encounter the power ON self-test result
error-beeps from a badly malfunctioning or damaged
power pack. If so, the user should return the power
pack to Zero for repair or replacement.
PATTERN WHEN MEANING
3 Long
Pwr-on
M-cmd
Fail
Power ON
self-test/
Mfg.test
BMS Error Beep Pattern