Zero Motorcycles XU 2012, Owner'S Manual

Page: 66 / 142

4-17
Quick Charging
Quick charging is an option that contains a
stand-alone charger (A) and dual charger harness
(B). It is used in conjunction with the charger
supplied with the motorcycle (C) or the XU’s
integrated charger. The XU requires a dealer installed
quick charge harness. Using two chargers and the
quick charging harness to charge the power pack
shortens the charging time to about 2 hours for a
100% charge.
(Not Installed in Motorcycle)
1. Remove the power pack from the motorcycle. See
Power Pack Swapping on page 4-8.
2. Connect the quick charger harness and both
chargers to the power pack.
3. Always connect the chargers to a GROUNDED
outlet. When using an extension cord, avoid
excessive voltage drops by using a grounded,
3-wire, 12-AWG cord no longer than 7.6 m (25 ft).
The charger can be used on 120 V AC or 240 V
AC current. The voltage does not change the
amount of time that the motorcycle takes to
charge.
C
A
B