Zero 88 jester 24 Operating Manual Download Page 53 | Manualshive

Page: 53 / 73

background image

Other Features

JesterML Operating Manual

73-406-00 Issue 2.0

53 of 73

Other Features

Online Help

The JesterML has an online help section built into the desk.  To access Online Help
at  any  time,  press  SHIFT+LEFT+RIGHT  and  the  JesterML  will  display  a  basic
summary help screen.  You can navigate around the help screens to view other topic
areas.
The language for the online help can be selected in Setup.

Software Updates

When  software  updates  become  available for  the  JesterML, announcements  will  be
posted on the Zero 88 website – www.zero88.com – detailing how and where to get
the  updates.    If  you  are  unsure  if  you  are  running  the  latest  software,  visit  the
download section of the Zero 88  website.  It is important to keep the console up to
date  as  often  software  updates  may  mean  exciting  new  features  as  well  as  critical
updates when required.

To  perform  a  software  update  on  the  JesterML,  first  download  the  file  from  the
Zero 88 website and unzip it to the root directory on a USB Memory Stick.  The USB
Memory Stick must contain the

.JOS

file – the JesterML is not able to unzip a

.ZIP

file

itself, nor navigate subdirectories.  Next, boot the JesterML with the memory stick in
the USB port, and with the left and right cursor buttons held down.  The update will
begin  after  a  few  seconds,  and  you  will  be  guided  through  the  process.    After  the
update is complete, you can remove the memory stick and the desk will load the new
software.    Always  read  the  release  notes  accompanying  a  release  to  familiarise
yourself with the new features, and to be aware of any special instructions related to
the new version.

Zero  88  consoles  have  a  long  history  of  user-inspired  development.    If  you  have  a
suggestion for a feature which is not currently included in the JesterML or any of our
other  products,  visit  the  Zero  88  website,  follow  the  link  to  our  forums  and  make  a
suggestion.    Membership  is  free  and  information  about  software  updates  will  be
posted online when they become available.

«
...
51
52
53
54
55
...
»

Summary of Contents for jester 24










































































Reviews:

No comments

Related manuals for jester 24

Brand: Laica Pages: 4

Brand: Tabi Pages: 8

Brand: Dabi Atlante Pages: 102

Brand: Fellowes Pages: 20

Brand: Haaga Pages: 31

FlexDraper FD2 Series

Brand: MacDon Pages: 2

OXYGEN PRO MINI

Brand: M-Audio Pages: 56

Brand: Rain Harvesting Pages: 2

Brand: UEi Pages: 5

Brand: UGO BASILE Pages: 47

Brand: UFO Pages: 16

Brand: Yamaha Pages: 31

Brand: Cannon Pages: 70

Brand: Sakai Pages: 31

Brand: B. Braun Pages: 40

Brand: B. Braun Pages: 4

ABS-Lock III-BE

Brand: ABS Pages: 8

Brand: Numark Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands