17
7.
Configuration and usage
FIRST USAGE
After unpacking the device pull out the folium with “Pull me” note,
it secures battery holding up the time. Next connect the power
supply, Zenpro device boots for about 60 seconds. It’s illustrated
by blinking of the status diode . When status diode stops to blink
the device is ready to use.
The Zenpro device by default provides own Wi-Fi network
“SmartControl_SERIALNO” (where SERIALNO is the serial number
of your Zenpro device). Connect to this network with mobile
device.
Following steps should be taken:
1)
On the mobile device download Zenpro SmartContol
application for Android – Google Play or iOS Appstore.
Type “Zenpro SmartControl” in the search bar of store or
use QR-code below to get directly to the app.
Android
iOS
