19
Wi-Fi settings. “SmartControl_SERIALNO” network will be
available to connect. You can retry the operation again.
2)
Through the Ethernet cable attached to the set
Plug in the Ethernet cable into the Zenpro Device and into empty
socket in your home router. Next log to the home Wi-Fi network
with your mobile device and use the search button.
RESSETING DEVICE
In case of problems with device configuration (ex. Typing wrong
password when connecting device to home Wi-Fi network) it’s
possible to reset the device settings.
1)
Pressing shortly the Reset button on the back panel will result
in
resetting
the
Wi-Fi
settings.
The
default
„SmartControl_SERIALNUMBER” Wi-Fi network will be
available.
2)
Holding the reset button for 5 seconds will result with factory
reset. It will delete all devices and groups that were added to
system, and will bring back all the settings to the factory state.
CONTROLLING THE DEVICES WITH PC
To control the devices with PC, you have to open web browser (IR,
Chrome, Firefox…), connect your PC to the same network which
Zenpro Unit is connected and type in IP address of the Zenpro
device in the address bar. The IP address of the Zenpro Unit can be
