TMD-Display One
Technical Support:
http://zennioenglish.zendesk.com
60
Shutter
Figure 49
Individual Button - Shutter.
The (alternating) move up/down orders will be sent through the “
[Btn] [Xn] Shutter -
Move
” one-bit object, while the (alternating) step up/down orders will be through the
“
[Btn] [Xn] Shutter - Stop / Step
” one-bit object.
Additionally, a one-byte object (“
[Btn] [Xn] Shutter Position
”) is provided to link it to
the position status object of the shutter actuator (in fact, this object is only intended to
receive values from the bus, not to send them). As explained in 2.3.4, the alternation of
the move up/down and the step up/down requests will be conditioned to these
statuses, to prevent sending ineffective requests.
The parameters for this function are:
Type
: sets the desired control type: “Standard” or “Hold & Release”, which
have been described in section 2.3.4.
LED illumination control
: analogous to the homonymous parameter for all
the previous functions (see previous pages). The options in this case are
“Regular” and “Dedicated object”.
Enumeration
Figure 50
Individual Buttons – Enumeration.
