MAXinBOX FC 0-10V FAN
http://www.zennio.com
Technical Support:
http://support.zennio.com
13
13
2.3
BINARY OUTPUTS
MAXinBOX FC 0-10V FAN incorporates
four binary outputs
, each of which can be
enabled and configured in parameters independently.
Although in this device they are offered with the aim of controlling the
gate valves
of
the fan coil tubes (up to four), their parameterisation is similar to that of the individual
relay outputs of any other MAXinBOX actuators. Note that they all work
independently
, although it is possible to group them as required (for example, to pen a
gate valve when another one closes) through joint group addresses and to configure
each of them as “normally open” or “normally closed”, to open / close its gate valve on
the reception of a “0” or of a “1”.
Practical usage examples of the different outputs and modules all together are offered
in
“
Annex I: Independence of the modules
” of this user manual.
Please refer to the specific manual “
Binary Outputs in MAXinBOX FC 0-10V FAN
”
(available at the Zennio homepage,
www.zennio.com
) for detailed information.
