MAXinBOX FC 0-10V FAN
http://www.zennio.com
Technical Support:
http://support.zennio.com
21
21
Figure 11
Output percentage depending on the input setpoint, the two offsets and the maximum.
Figure 12
Output percentage depending on the input setpoint,
the two offsets and the fan speed with the valve closed.
It is possible to define a
forced position
in parameters, which allows setting (on
request through the corresponding object) the fan speed to a pre-set value (with no
action on the valves). Under the forced position mode:
The
valves
remain in the state they were before the forced position order.
% Input
% Output
Offset 1 Offset 2
Offset 2
100 %
100 %
Max.
Valve Open
Val
ve
C
lo
sed
Max
.
% Input
% Output
Offset 1 Offset 2
Offset 2
100 %
100 %
Max.
Valve open
Val
ve
C
lo
sed
Max.
Speed in
coling mode
