MAXinBOX FC 0-10V FAN
http://www.zennio.com
Technical Support:
http://support.zennio.com
9
9
2
CONFIGURATION
After importing the corresponding database in ETS and adding the device into the
topology of the desired project, the configuration process begins by entering the
Parameters tab of the device.
2.1
GENERAL
The first parameterisable screen available by default is
“General”. From this screen it is
possible to activate/deactivate all the required functionality.
ETS PARAMETERISATION
Figure 2
General screen.
Once activated,
Inputs, Binary Outputs, 0-10V Analog Outputs, Fan Coils,
Logical Functions, Thermostats
,
Manual Control
(enabled by default) and
Master Light
bring additional tabs to the menu on the left. These functions
and their parameters will be explained in later sections of this document.
Sending of Indication Objects (0 and 1) on Bus Voltage Recovery
: this
parameter lets the integrator activate two new communication objects (“
Reset
0
” and “
Reset 1
”), which will be sent to the KNX bus with values “0” and “1”
respectively whenever the device begins operation (for example, after a bus
