IRSC Plus
Technical Support:
7
2
CONFIGURATION
The IRSC Plus application program permits controlling air conditioning systems from
different manufacturers as if they were being controlled through the infrared remote
control of the machine.
A correspondence table is available at the Zennio homepage (
with the codes (from 0 to 255) corresponding to the different remote controls that can
be emulated. This number is the first parameter to be set in ETS, so that the orders
sent by IRSC become particularised for the actual A/C unit to be controlled.
Moreover, the following functionalities of the A/C system can be configured:
ON/OFF
control of the A/C system.
Status Objects
, which also work as acknowledgement objects for the orders
sent to the system.
Working Mode
: the desired working mode (Automatic, Heat, Cool, Fan, Dry)
may be chosen through independent binary objects (one per mode) or
through a sole object (only one object for the mode selection). Moreover,
apart from these conventional controls, it is possible to enable a simplified
control, which only permits commuting from Heat to Cold and vice versa.
Fan Speed
: step-controlled or through a precise control.
Possibility of
enabling and configuring
:
Up to
4 different scenes
.
Timed
ON/OFF switching.
Energy saving
functions, such as
window sensor
and
presence
detection
.
All these options are explained in detail in section 3.
