Zenith Therm-X Series, User Manual

Page: 19 / 38

18
IFU-001 Rev. 8
10 C
ARING FOR YOUR
T
HERM
-X S
YSTEM
Cleaning
Therm-X Device
The interior of the Therm-X does not need to be cleaned; there is no need to empty and replace
the coolant in the tank.
To clean the exterior of the device, wipe down the exterior with an alcohol cleaning pad or
equivalent soft cloth with a mild cleaning product. The device should be cleaned whenever it
encounters bodily fluids or between patients. Do not use solvent based cleaners or abrasive
materials.
Use compressed air to ensure the radiator grill of the Therm-X device remains clear of dust and
debris as needed.
Garments
Please refer to the individual Garment Manual that came with your garment for cleaning
instructions.
Umbilical Hose
Between uses, the umbilical hose may be wiped down with an alcohol cleaning pad or equivalent
soft cloth with a mild cleaning product. Do not use solvent based cleaners or abrasive materials
to clean the umbilical hose.
Storage
Therm-X Device
The device should be stored without coolant in a temperature range of +33°F to +122°F in below
60% non-condensing humidity. Devices with coolant content must be stored above +32°F (0°C).
To drain the unit, first turn the unit off and unplug it from its electrical source. Disconnect all
hoses from the unit. Remove the coolant reservoir cap from the unit by twisting it counter-
clockwise. Lift the unit with both hands and tip it backwards to empty the coolant into a bucket
or sink. Continue to tip the unit until the reservoir is completely empty.
Garments
Garments without coolant contents may be stored in the same environment as the device, in a
temperature range of +33°F to +122°F in below 60% non-condensing humidity. Garments with
coolant content must be stored above +32°F (0°C).
Disposal
Therm-X Device
The device and device components can be disposed in accordance with local regulations.
Garments
Garments may be disposed of as regular waste.