Zenith Therm-X Series, User Manual

Page: 9 / 38

8
IFU-001 Rev. 8
6 P
REPARING YOUR
T
HERM
-X S
YSTEM FOR USE
These instructions are supplemented by the Quick Start Guide available from the Therm-X home
screen.
Unpacking your System
Your Therm-X package will include a Therm-X unit, a power supply, a power cord, an empty 16 oz.
coolant bottle, a Therm-X umbilical hose, and a user manual. Ensure you have all parts of the Therm-X
system before proceeding. Please reference the figure in Section 3 for device and components images.
Additionally, you will need a Therm-X garment (sold separately) to operate Therm-X.
Filling the Device
For optimal device performance, purchase Therm-X coolant
from your distributor. If you have no coolant available, the
easiest way to make it is by purchasing the 91% isopropyl
alcohol solution available at most drug stores. Mix 1 gallon
(128 ounces) of distilled water with 1 pint (16 ounces) of 91%
isopropyl alcohol to create the Therm-X coolant; it is
recommended to use the Therm-X coolant sold by Zenith
Technical Innovations, LLC.
Once you have prepared the coolant mixture, open the tank
located at the back of the Therm-X and fill the tank to the red
line inside the tank filler neck. It is important whenever filling
the Therm-X to fill to the red line.
Attaching the Hoses
Press the 3-in-1 connector into place on the main unit
until you hear a click. If you are unable to attach the
connector, try pressing and releasing the red button on
the side of the hose connector and then trying again.
Attaching the Garments
To attach the garments, align the 3 fittings to their relative
ports on the umbilical hose. Press until an audible 'click' is
heard. For further instruction, please reference individual
garment guides, available with the garment or for download
at thermxtherapy.com.