Zenith FFH-185A, Installation And Operating Manual

Page: 7 / 14

7
CONNECTING THE SPEAKER
L
R
RED WIRE
BLACK WIRE
RIGHT SPEAKER
LEFT SPEAKER
RED WIRE
BLACK WIRE
1. Press the “ CLOCK ” button. (If the clock
is already set, press and hold the
“
CLOCK ” button for more than 2
seconds.) - The hours begin to blink.
2. Select a 24 hour cycle or 12 hour cycle
by using the “ PRESET (+)/(-) ” buttons.
3. Press the “ SET ” button to confirm the
selected hour cycle.
4. Use the “ PRESET (+)/(-) ” buttons to set
the correct hours.
5. Press the “ SET ” button.
6. Use the “ PRESET (+)/(-) ” buttons to set
the correct minutes.
7. Press the “ SET ” and the correct time is
shown on the display.
8. Press the “ CLOCK ” button at any time
to display the time for about 3 seconds.
1.Insert the red wire of the right/left hand
speaker into the red terminal )
at the back of the unit.
2.Insert the black wire into the black termi-
nal marked(-).
NOTE:
This speaker system is designed for
magnetic shielding, but the video image of
a nearby television may be distorted.
In this case, move the affected television
above 50 cm from the speaker system.
(12HR) or
(24HR)
SETTING THE CLOCK
ANTENNA CONNECTIONS
AM
FM
300 ohms
AM loop antenna (aerial)
(Supplied)
FM external
antenna (aerial)
(not supplied)
FM indoor antenna (aerial)
Position it for
the best reception
coaxial
cable