Zenith FFH-185A, Installation And Operating Manual

Page: 9 / 14

9
TUNER FUNCTIONS
To listen to the Radio
1. Press the “ TUNER/BAND ” button
repeatedly to choose either AM or FM
radio.
2. To tune to the desired station with
automatic tuning, keep “ TUNING (+)/(-) ,
(
or
) ” button
depressed for more than 1 second.
To tune to the desired station with manu-
al tuning, press the “TUNING (+)/(-) ,
(
or
)” button within 1
second repeatedly.
3. When listening to FM stations press the
“ MODE/RIF ” button for FM stereo
reception. The “ STEREO ” will appear in
the display.When a weak FM station is
being received-press the “
MODE/RIF ”
button so that ”STEREO” is cleared
from the display.
NOTE: Use “ MODE/RIF ” (Radio
Interference Filter) button to switch to
mono reception if stereo reception is dis-
torted by noise.
When recording the MW(AM) or LW broad-
cast, beat noises occur. If it does, press
this button once.
Presetting the stations
1.To clear any programm previously stored
in any memory.
(1) Press the “ PROG./MEMO. ” button for
2 seconds in TUNER mode so that
“
RESET ” flashes in the display.
(2) Press the “ STOP/CLEAR ” button
while “ RESET ” is flashing in the
display.
2. To memorize the stations in order
(1) Press the “ TUNER/BAND ” button to
select a desired wave band.
(2) Press the “ TUNING (+)/(-) (
or
) ” button to select a
desired station.
(3) Press the “ PROG./MEMO. ” button on
the unit and preset number flashes.
(4) Press the “ PROG./MEMO. ” button
again on the unit while preset number
is flashing.
(5) Repeat step (2) to (4) to memorized
up to 30 stations.
3. To memorize in selection channel
number.
(1)Select a desired station.
(2)Press the “
PROG./MEMO. ” button on
the unit.
(3)Select a desired channel number by
pressing the “ PRESET (+)/(-) or
PRESET ” button, while the
preset number flashes.
(4)Press the “ PROG./MEMO ” button on
the unit ,while the preset number
flashes.
4.To memorize and add channel number.
(1)Select a desired station.
(2)Press the “
PROG./MEMO. ” button on
the unit.
(3)Press the “ PROG./MEMO. ” button
again on the unit while the channel
number is flashing.
5.To recall presets
Press and hold the “ PRESET (+)/(-) or
PRESET ” button until the desired
preset number appears or press it
repeatedly.