Zenith FFH-185A, Installation And Operating Manual

Page: 12 / 14

12
TIMER FUNCTION
With the TIMER function you can have the
radio reception and recording, CD play,
tape play or auxiliary source play and
recording turned on and off at the time
desired.
1. Check the current time.
2. Press the “ TIMER ” button to enter the
timer setting mode. (If you want to
correct the previous memorized TIMER,
press and hold the “ TIMER” button
more than 2 seconds.)
The previous memorized timer on time
and the “ ” appears in the display. Each
function : TUNER-CD-TAPE flashes in
the display in turn.
3. Press the “ SET ” button when the desired
function is flashing.
4. If you select the TUNER or AUX:
“REC” and “PLAY” flash in the display
alternately for about 3 seconds.
Press the “
SET ” button to confirm the
desired operating mode.
REC: TUNER or AUX recording and play
PLAY: TUNER or AUX play only
•If you have selected the CD or TAPE,
ignore step 4.
5. When you have selected the TUNER;
Select the previous memorized preset
number with the “TUNING (+)/(-)” buttons
and press the “
SET ” button. The hour
with ON display flashes.
6. Set the hour to switch on by pressing the
“ PRESET (+)/(-) ” buttons.
7. Press the “ SET ” button to confirm the
hour to switch on. The minute with “ON”
display flashes.
8. Set the minute to switch on by pressing
the “ PRESET (+)/(-) ” buttons.
9. Press the “ SET ” button to confirm the
minute to switch on. The hour with
“OFF” now flashes in the display.
10. Set the hour to switch off by pressing
the “ PRESET (+)/(-) ” buttons.
11. Press the “ SET ” button.
12. Set the minute to switch off by pressing
the “ PRESET (+)/(-) ” buttons.
13. Press the “ SET ” button.
14. Adjust the volume level by pressing
the “ PRESET (+)/(-) ” buttons.
15. Press the “ SET ” button. “ ” appears
and the timer setting has been
completed.
16. Switch the system off.
The selected function is automatically
switched on and off at the time set.
17. To cancel or check the timer.
Each time the “ TIMER ” button is
pressed you can select the timer set or
cancel. You can also check the timer
setting status.
To activate or check the timer, press the
“ TIMER ” button so that “ ” lights
up in the display.
To cancel the TIMER, press the timer
button so that “ ” in the display
disappears.