background image

2

Explanation Graphical Symbols:

The lightning flash with arrow-
head symbol, within an  equilater-
al  triangle is intended to alert the
user to the presence of uninsulat-
ed dangerous voltage within the
product’s enclosure that may be
of sufficient magnitude to consti-
tute a risk of electric shock to
persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance(servicing) instructions in
the literature accompanying the
appliance.

WARNING

TO REDUCE THE RISK OF FIRE OF
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOIS-
TURE.
To avoid electrical shock, do not open the
cabinet, Refer servicing to qualified   per-
sonnel only.

The apparatus shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on the apparatus.

Warning

:

Do not install this equipment in a confined
space such a book case or similar unit.

This label is located on the interior.

This Compact Disc  player is classified as a
CLASS 1 LASER  product.
The CLASS 1 LASER PRODUCT label is
located on the exterior.

CAUTION

Use of controls or adjustments or 
performance of procedures other than
those specified herein may result in 
hazardous radiation exposure.

Laser component in this product is capa-
ble of emitting radiation exceeding the
limit for Class 1.

CAUTION:

INVISIBLE LASER RADIA-

TION WHEN OPEN AND INTERLOCKS
DEFEATED. AVOID EXPOSURE TO
BEAM.

VARNING:

OSYNLIG

LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD STRÅLEN ÄR FARLIG.

Attention:

Quand l'appareil est ouvert, ne

pas s'exposer aux radiations invisibles du
faisceau laser.

CLASS 1           LASER  PRODUCT
KLASSE 1         LASER  PRODUKT
LUOKAN 1        LASER  LAITE
KLASS 1           LASER  APPARAT
CLASSE 1         PRODUIT  LASER

CAUTION

CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE
COVER(OR BACK) NO USER SER-
VICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

RISK OF ELECTRIC

SHOCK DO NOT OPEN

Summary of Contents for FFH-185A















Reviews: