Zenith FFH-185A, Installation And Operating Manual

Page: 11 / 14

11
CASSETTE DECK FUNCTION
1.Tape play
(1)Press the “TAPE” button.
“ TAPE ” appears on the display.
(2)Press the “ PUSH EJECT”, position to
open the cassette door.
(3)Insert a recorded cassette with the
exposed tape side down.
(4)Press the “PLAY
” or “PLAY ” button
to begin tape playback.
(5)To manually change the tape play
directions, press the opposite PLAY
button from the direction the tape is
currently playing.
(6)To stop playback at any time, press the
“ STOP/CLEAR ” button.
2. To select a play mode (reverse mode)
Press the “ PLAY MODE(TAPE) ” button
during tape function or recording from
another function.
= forward or backward play once
only
= forward and backward play once
only
= forward and backward play for
six times.
3. Tape counter reset function.
During tape stop or play press the “ CD
/COUNTER ” button.
4. Recording from Radio, CD or auxiliary
source.
NOTE : Use only normal tapes.
(1) Insert a blank tape into deck.
(2) Press the “TUNER/BAND”,“CD”,TAPE”
or “AUX” button. (And press the “ CD
/ COUNTER ” button to reset the tape
counter)
(3) Select a play mode by pressing the
PLAY MODE (TAPE) button.
•If you want to record forward or backward
only set to .
•If you want to record from forward to
backward set to or .
(4) Select a function that you want to
record and play.
(5) Press the “ REC ” button again.
“ REC ” blinks on the display.
(6) Press the “ REC ” button again to
begin recording to the direction of PLAY
( or ) indicator or press the or
button to begin recording to the
selected play direction.
5. CD to tape synchronized recording.
NOTE : Use only normal tapes.
(1) Load a disc.
(2) Insert a blank tape into deck.
(3) Select a play mode by pressing the
PLAY MODE(TAPE) button repeatedly.
In
mode you can record forward
( ) only and in or mode
you can record from forward( ) to
backward ( ).
(4) Press the “CD” button.
‘CD’ appears on the display.
Stop the CD if the CD is playing.
(5) Press the “ CD SYNC. ” button to start
recording.
The CD synchronized recording
begins and stops automatically at the
end.
When the tape is set to auto reverse
backward(
), the CD will restart the
current track from the beginning.
• If you want to record certain titles only,
programme these before commencing
CD synchronized recording.
• If you want to record from the desired
track, select the desired track with the
“
or
” button before
commencing CD synchronized recording.