CoolSculpting® Elite
System User Manual
System Messages
CS-UM-CM3-02-EN-D
45
Table 13: Error Messages: System
ZELTIQ
Code
Message text
Action
Z801
Chiller error. Z801-YYY
For all error messages:
•
If a system error occurs, treatment
automatically stops. Contact Customer
Service.
•
Power the control unit off and on.
•
If the problem persists, contact Customer
Service.
Z803
Control unit error. Z803-YYY
Table 14: Software Launch Messages
ZELTIQ
Code
Message text
Action
Z920
Z920-YYY Control Unit Error
Power the control unit off and on. If the
problem persists, contact Customer Service.
Z980
Z980-YYY Software Installation Error
Power the control unit off and on and retry the
software installation. If the problem persists,
contact Customer Service.
Table 15: System Notification Text
The notification text is transmitted to the pager when the pager event occurs.
Notification Text
Notification Event
R01: System {side A or B (optional)} error detected.
System error
R02: Treatment {side A or B} complete.
Treatment completed successfully
R03: Treatment {side A or B} canceled.
Treatment canceled
R04: Error detected. Treatment {side A or B} stopped.
Treatment ended with an error
R05: Treatment {side A or B} ends in {0} minute(s).
Treatment almost complete
R06: Patient called.
Patient call
