System Overview
CoolSculpting® Elite
System User Manual
14
CS-UM-CM3-02-EN-D
Touchscreen Display
The touchscreen displays system controls, information about the status of the system, information
about the treatment, and messages for the operator. You can rotate or tilt the display to accommodate
better access.
Card Slot
The card slot accepts treatment cards. You must insert an appropriate Solo or Dual treatment card with
active credits to begin a treatment.
Casters and Locks
The control unit has four casters that swivel. Each caster has a lock. Always engage all four caster
locks when the unit is stationary. Disengage the caster locks to move the unit.
►
To engage the caster locks:
Press down on the locking lever with the toe of your shoe.
►
To release the caster locks:
Pull up on the locking lever with the toe of your shoe.
►
To move the control unit:
1. Power off the control unit.
2. Unplug the power cord from the wall outlet and place it in the bucket of the control unit.
3. Release the lock on each caster.
4. Push or pull the lip of the top cap to move the control unit to the new location.
Note:
Do not push or pull on the touchscreen display or the display post to move the unit.
5. When you have placed the control unit in its new location, engage the lock on each of the four
casters.
While moving the system within the office, place the applicator in the bucket provided on top
of the control unit. In addition, grasp the top cap lip of the system to guide the unit from one
location to another.
Bucket
The bucket is a storage area for applicators and/or consumables. You can remove the bucket from the
control unit for cleaning.
Figure 2: Image of the top the system that shows the bucket
