CoolSculpting® Elite
System User Manual
System Overview
CS-UM-CM3-02-EN-D
17
Soft Power Button
The display includes a soft power button at the lower right corner, which is used to power on the
system, after turning the power switch on the rear of the system to the “On” position. The soft power
button may also be used to power off the system.
When the system is in standby or sleep mode, the power button is illuminated and will pulse. This
indicates that the system is asleep. Pressing the button will awaken the system.
►
To power on the control unit:
1. While the power switch is On, and the system is off, press the soft power button on the display.
►
To power off the control unit:
1. While the power switch is On, and the system is on, press the soft power button on the display
2. A pop-up message will be displayed asking “Are you sure you want to power off the device?”
3. Select “Yes”
Figure 5: Soft Power Button
Applicator Connectors
The control unit has two connector ports where two umbilical cords attach to perform a simultaneous
treatment. Simultaneous treatment is an option, but not necessary.
Vents
Vents provide airflow that reduces heat build-up inside the control unit. Ensure that all vents are free
from obstructions when the control unit is in operation.
