
BEFORE ITS FIRST USE
Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the steam iron. Be sure to remove any packaging material and labels before using for the first
time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes
and there may be traces of dirt on the soleplate.
HOW TO USE
Always check whether a label with ironing instructions is attached to an article to be ironed. Follow these
instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing instructions
or in fabric label.
Insert the main plug into the wall socket. The indicator light will turn on and will start blinking. Once the
selected temperature is reached, the light will be fixed and you will hear an acoustic sound, indicating you
may start ironing.
WATER TANK FILLING
Unplug the iron before filling the water tank.
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap
water with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively
(distilled water: tap water). Check with your water supplier to determine the type of water in your area.
Never use 100% distilled or demineralized, rain water, softened water, scented water, water from other
appliances such as refrigerators, air conditioners, dryers or other types of home water preparation water.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water. The water tank should
be emptied after each use.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.
STEAM IRONING
Set the temperature control dial to the desired position in accordance with the manufacturer’s label. The
LED of the selected temperature will start blinking until the temperature is reached. Then the LED will
The iron must not be left unattended while it is connected
to the supply mains.
The plug must be removed from the socket-outlet before
the water reservoir is filled with water.
The iron must be used and rested on a flat, stable
surface When placing the iron on its stand, ensure that
the surface on which the stand is placed is stable.
The iron is not to be used if it has been dropped, if there
are visible signs of damage or if it is leaking.
Keep the iron and its cord out of reach of children less
than 8 years of age when it is energized or cooling down.
This device is designed for use at a maximum altitude up
to 2000m above sea level.
CAUTION Hot surfaces. Surfaces are liable to get
hot during use.
IMPORTANT WARNINGS
This appliance is designed for home use and should never be used for commercial or industrial use under
any circumstances. Any incorrect use or improper handling of the product shall render the warranty null
and void.
Prior to plugging in the product, check that your mains voltage is the same as the one indicated on the
product label.
If you use one adaptor make sure it can reach 16 A and is provided with earth socket
The mains connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to t supply mains with the hands and / or feet wet. Do
not pull on the connection cord in order to unplug it or use it as a handle
Do not direct steam at people and animals.
Do not place the appliance under the tap to fill the water tank, or immerse it in water or other liquids. Unplug
the product immediately from the mains in the event of any breakdown or damage and con- tact an official
technical support service. In order to prevent any risk of danger, do not open the device. Only qualified
technical personnel from the brand´s Official technical support service may carry out repairs or procedures
on the device. Only an official technical support service centre may carry out repairs on this product.
Proceed according to maintenance and cleaning section of this manual for cleaning
B&B TRENDS SL.
disclaims all liability for damages that may occur to people, animals or objects, for the
non-observance of these warnings.
WE WOULD LIKE TO THANKS YOU FOR CHOOSING ZELMER,
WE WISH THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.
WARNING
PLEASE READ THE INSTRUCTIONS FOR USE CAREFULLY PRIOR TO USING THE PRODUCT.
STORE THESE IN A SAFE PLACE FOR FUTURE REFERENCE.
DESCRIPTION
1. Spray button
2. Shot of steam button
3. Steam regulator
4. Cover for filling opening
5. Output water spray
6. Self-cleaning button
7. Temperature Control
8. Temperature indicator light
9. Level mark for maximun filling
10. Power cord
11. Soleplate
12. Auto shut off indicator
13. Handle with sensor
SAFETY INSTRUCTIONS
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
If the supply cord is damaged it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
12
become fixed and you will hear an acoustic sound.
Set the variable steam control to the desired position.
The appliance has an intelligent steam control that will automatically control the variable steam to make
sure its according to the temperature level selected. This means that even the variable steam control is set
in high position, if the temperature level is in low position the appliance will automatically regulate steam to
be according to the temperature level to avoid damaging clothes.
CAUTION: Avoid coming in contact with ejected steam.
DRY IRONING
The steam iron can be used on the dry setting with or without water in the water tank, it is best to avoid
having the water tank full while dry ironing.
Turn the variable steam control to the minimum position.
Select the setting on the temperature control dial best suited for the fabric to be ironed.
CAUTION: If the steam iron has been used for a long time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.
SHOT OF STEAM
The shot of steam feature provides additional steam for removing stubborn wrinkles. Turn off the variable
steam control to the min position
Press the powerful steam button to release the burst of steam.
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in continuously
and wait almost 5 seconds between pressures.
VERTICAL IRONING
By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung garments, etc.)
NOTE: To prevent water leakage from the soleplate, do not keep the powerful steam button in continuously
and wait almost 5 seconds between pressures.
WHEN YOU FINISHED IRONING
Set the temperature dial to the minimum position. Remove the main plug from the wall socket.
Stand the iron on heel rest.
MANITENCE AND CLEANING
It is recommended to the self-cleaning every two weeks if the water in the area is hard or semi-hard if
frequent use of the device is made
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled
down.
Do not use abrasive cleaners.
To clean exterior surfaces, use a damp soft cloth and wipe dry. Do not use any chemical solvents, as these
will damage the surface.
Cleaning the soleplate; Do not use scouring pads or harsh cleaners on the soleplate as these will da- mage
the surface. To remove burnt residue, iron over a damp cloth while iron is still hot. To clean the soleplate,
simply wipe with soft damp cloth and wipe dry.
EN
SELF-CLEANING
Fill the half of the water reservoir.
Set the temperature control to its maximum position. Insert the main plug into the wall socket.
Allow the iron to heat up until the indicator light becomes fixed. Unplug the steam iron.
Holding the iron horizontally over the sink and press the button of Self clean, in case if not have this button
change the steam control to the maximum position.
Boiling water and steam will be ejected from the holes in soleplate with impurities washed out Move the
iron over an old (preferably) piece of cloth. This ensures that the soleplate will be dry during storage. Is
recommended to do the self-cleaning at least every two weeks.
ANTI-CALC SYSTEM
A special resin filter inside the water reservoir softens the water and prevents scale build-up in the plate.
The resin filter is permanent and does not need replacing.
Please note: Do not use chemical additives, scented substances or decalcifies. Failure to comply with the
above-mentioned regulations leads to the loss of guarantee.
AUTO SHUT-OFF
An electronic safety device will automatically switch the heating element off if the iron has reached the
temperature selected and the handle sensor is not touched for more than 10 seconds approximately in a
horizontal position. If in a vertical position, this will happen after 10 seconds approximately, too, provided
selected temperature is reached and handle sensor is not touched. To indicate that the heating element
has been switched off, the auto-off pilot light will start blinking.
When picking up the iron again, the auto-off pilot light will turn off. The power pilot light will turn on. This
indicates that the iron is heating up again.
Wait for the power pilot light to become fixed, then the iron is ready for use.
SENSE TECHNOLOGY
The iron handle incorporates a sensor that, when the variable steam is selected, will turn on the variable
steam function while the hands touches the handle form the upper part. If the iron is not touched the
variable steam function will be stopped.
INJECTION STEAM
The appliance has an injection steam system that injects water to the soleplate in order to facilitate a
greater penetration of steam into the garments. You will notice this function as a small vibration when
product is working under steam ironing function.
C
M
Y
CM
MY
CY
CMY
K
AF-MANUAL_Plancha-ZIR3210 performance.pdf 12 8/4/21 15:09
Summary of Contents for ZIR3210
