22
ZCM3821-001_v01
Displays
Function displays
Cleaning
8 cups
Milk froth
Powder
Empty grounds box/
Door open
Descaling
4 cups
Coffee mug
Intensive
Refill water
2 cups
Coffee cup
Medium
Heating function
Milk system
cleaning
1 cup
Espresso cup
Mild
Confirmation
Program
Number of cups per
dispensed quantity
Cup flling volume
Coffee grinding quantity
Messages
Menu functions
Button combination for the menu
2
+
3
for 3 sec
Water tank illumination
2
Water hardness
3
Illumination off
Illumination on
Hardness level 1
Soft
Hardness level 2
Medium hard
Hardness level 2
Hard
Hardness level 4
Very hard
Coffee temperature
4
Switch-off time
5
Warm
Hot
Extra hot
9 minutes
30 minutes
60 minutes
180 minutes
Exiting the menu
6
Putting into operation
REQUIREMENTS FOR PLACE OF OPERATION
For safe and trouble-free operation of the coffee machine, the place of operation must
satisfy the following requirements:
●
Place the coffee machine on a fixed horizontal, heat-resistant and waterresistant
surface that is strong enough to hold it.
●
Select the installation- and connection location out of reach of children.
●
The coffee machine is not intended for installation in enclosed spaces such as
a built-in cupboard.
●
The plug socket must be easily accessible so that the mains plug can be easily pulled
out in an emergency.
●
In order to assume a fault-free operation, the ambient temperature should be between
8°C and 40°C.
When the appliance has cooled under 0°C, the appliance temperature
must reach an area within the recommended ambient temperature, before
switching on the appliance once again.
ELECTRICAL CONNECTION
For safe and trouble-free operation of the coffee machine, the following instructions on
electrical connection must be observed:
●
Before connecting the coffee machine, compare the connection data (voltage and
frequency) on the rating plate with those of your mains power supply. This data
must correspond in order to avoid damage to the coffee machine. If in doubt, consult
a qualified electrician.
●
The socket must be secured at least 10A fuse breaker. Ensure that the connecting
cable is undamaged and is not laid over hot surfaces or sharp edges.
●
Connection the mains supply via an extension cable must not exceed a length of
3 metres and a cable cross-section of 1.5 mm². For fire prevention reasons, the use of
multiple adapters or power outlet strips is forbidden.
●
The connecting cable must not be pulled tight.
●
The electrical safety of the coffee machine is only assured when it is connected to
a properly installed protective earth (PE) conductor system. Connection to a mains
socket without PE conductor is forbidden. If in doubt, the electrical system must be
checked by a qualified electrician. The manufacturer assumes no liability for injury or
damage caused by a missing or interrupted protective earth conductor.
6
5
4
3
2