49
JP1500-001_v03
Do not overload the appliance by too much product or
●
pushing it too hard (by means of the pusher).
Do not expose the appliance to temperatures above
●
60°C.
Do not place the appliance on wet surface.
●
Do not immerse the motor in water or wash it with
●
running water.
Always place the appliance on a stable, even, and flat
●
surface; the power cord may not hang over the edge of
the surface, where the appliance has been situated.
Suggestion
Information on the product and suggestions
for its use
The appliance is designed for domestic use only.
●
In case of using it in catering business, the terms of the
guarantee shall change.
Do not remove the lid with the hopper, as this triggers
●
a safeguard, and turns the appliance off.
When you are done operating the appliance, unplug
●
the power cord from the socket.
Do not use aggressive detergents, such as lotions,
●
cream cleaners, pastes, etc. They may accidentally
remove graphical information visible on the surface,
such as: scales, markings, danger signs, etc.
Use a soft brush to clean any metal elements,
●
especially of the filter.
The Description of the Appliance
(Fig. A)
1
Motor
a
ON-OFF-REV switch
b
Power cord
2
Bowl
c
Pulp nozzle
d
Juice nozzle
e
Rubber stopper
3
Juice sweeper
4
Filter
5
Extracting bolt
6
Lid with the charging hopper
7
Pusher
8
Juice and pulp container
9
Brush
Before Use (disassembly)
(Fig. C)
Before using the appliance for the first time,
disassemble the extractor, and wash the parts
which come into contact with the processed
product.
1
Place the extractor near a power socket on a hard, clean,
and dry surface.
2
Take out the pusher
(7)
.
3
Remove the lid
(6)
by turning it counter-clockwise.
4
Next remove the bowl
(2)
together with its accessories.
5
Remove the extracting bolt
(5)
from the bowl
(2)
.
6
Next remove the filter
(4)
with the juice sweeper
(3)
.
7
Disconnect the filter
(4)
from the juice sweeper
(3)
.
8
Pull out the rubber stopper
(2c)
situated on the bottom of
the bowl
(2)
.
Wash the disassembled elements (excluding the motor)
●
thoroughly in warm water with the addition of a dishwashing
liquid. After drying them carefully, assemble the juicer.
Do not wash the elements in a dishwashing
machine. The water used for washing should
not exceed 60°C.
Before Use (assembly)
(Fig. D)
1
Place the rubber stopper
(2e)
in the opening situated on
the bottom of the bowl
(2)
.
2
Install the bowl
(2)
onto the motor
(1)
in such a way that
the 3 protrusions from the top surface of the motor
(1)
are
situated in the 3 hollows found on the bottom of the bowl
(2)
.
3
Install the juice sweeper
(3)
on the filter
(4)
.
4
Place the assembled element into the bowl
(2)
in such
a way that the red dot situated on the edge of the filter
(4)
is
placed in a line with the triangle on the bowl
(2)
.
Make sure you read the whole of this instruction
manual, before you start operating the juice presser.
Technical Data
The technical data is given on the rating plate of the
appliance.
Maximum permissible operation time is 20 minutes. Break
time needed before using it again is 1 hour.
Noise level (L
WA
) 71 dB(A).
JP1500 juice presser is a 1
st
class appliance equipped with
a power cord with a protective conductor and a plug with
a safety pin.
It must be plugged into grounded receptacle.
JP1500 juice presser complies with the needed standards.
The appliance is in conformity with the following directives:
Low Voltage Directive – 2006/95/EC.
–
Electromagnetic Compatibility (EMC) – 2004/108/EC.
–
The rating plate of the appliance has the CE mark on it.
Summary of Contents for JP1500
