Zelmer je1200, User Manual

Page: 54 / 60

58
JE1200-001_v05
●
The appliance must be plugged only to an alternating
current socket with power corresponding to the power
stated on the name plate of the appliance.
●
Immediately stop the operation and unplug the
appliance if any liquid gets into the motor. Return
the appliance to an authorised service facility for
examination and servicing.
●
Never overload the appliance by processing extensive
amounts of products or pushing them too hard into the
feeding tube.
●
Turn off the appliance immediately if you notice
that it vibrates excessively or the rotation speed has
dropped. Wash the strainer and its housing.
●
Turn the motor off and unplug the appliance if food
is blocked in the feeder or on the grinding blades.
Remove the cause of blocking.
●
Do not expose the appliance to temperatures
exceeding 60°C.
●
Do not leave the appliance unattended when it is
plugged to a socket.
●
Do not immerse the motor unit in water or rinse it under
running water.
●
Never clean the casing with any aggressive detergents
(emulsion, milk, paste, etc). They can remove graphic
symbols such as labels, caution signs, etc.
●
Clean all metal parts of the appliance with a soft brush,
especially the strainer and the shredding disc.
●
Never operate the appliance without the pulp container.
5
Power cord
6
Juice bowl
7
Spout
8
Locking clamps
9
Strainer
10
Lid
11
Feeding tube
12
Pusher
13
Jug
14
Jug lid with froth separator
15
Pulp container
16
Brush
Preparing for operation
DISASSEMBLING
Before first use, disassemble the appliance and
wash all parts in contact with processed fruit or
vegetables.
●
Place the appliance near a wall socket on a clean hard
and dry surface.
1 Press the locking clamps all the way down to release the lid.
2 Remove the pusher and the lid.
3
Slide out the pulp container.
4 Remove the juice bowl with the strainer by turning the
bowl counter-clockwise so that the symbol on the bowl is
aligned with the symbol
on the motor unit. Remove the
juice bowl from the motor unit.
Wash all parts (except the motor unit) carefully in
warm water with some washing liquid. You can
also clean them in a dishwasher at max. 60°C
(except the juice bowl, strainer and motor unit).
Dry all parts thoroughly and replace once dry.
ASSEMBLING
1 Place the juice bowl on the motor unit, aligning the
symbol on the underside of the bowl with the symbol
on the motor unit.
2 Lock the juice bowl by turning it clockwise so that the
symbol on the motor unit is aligned with the symbol on
the underside of the bowl.
3 Mount the strainer on the skimmer so that the notch on
the skimmer is aligned with the groove in the strainer.
The strainer may be mounted in one position
only.
4
Slide the pulp container under the lid as follows: lean the
pulp container and place it under the insert of the bowl so
that the protrusion in the pulp container is placed inside the
groove in the bowl. Then slide it in towards the motor unit.
B
C
TIP
Product information and tips
for use
●
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions shall change.
●
Before first use, remove all packaging from the
appliance and wash all accessories thoroughly.
●
Unplug the appliance when finished extracting juice.
●
For easier operation you may put a plastic bag into
the pulp container and discard it together with the pulp
after extracting juice.
Technical data
The technical data are given on the name plate.
Maximum continuous operation time: 2 minutes
Time interval between successive uses: 30 minutes
Noise level (L
WA
) 77 dB/A
Appliance parts
1
Motor unit
2
Control knob (PULSE, 0, level 1, level 2)
3
Skimmer
4
Feet
A