Zelmer HD1000, User Manual, Page: 29 / 32

29
HD1000-001_v02
Always unplug hair dryer after use.
●
Use hair dryer according to its intended use only as
●
stipulated in the present instruction.
CAUTION: In order to ensure additional protection it
is recommended to equip electric circuit supplying
the bathroom with a residual current device (RCD)
with a residual current not exceeding 30 mA. In this
respect a specialized electrician is to be addressed.
Use and operation of the hair dryer
USE
After washing your hair dry it thoroughly with a towel. Check
if the switch of air stream strength regulation (4) is placed in
position „0”. Plug the appliance into the socket and choose
correct strength of air stream using the switch (4) .
IONIC TECHNOLOGY
Hair dryer is equipped with a built-in generator producing
negative ions, which enhance moist absorption, thanks to
which hair does not get dried during styling and is softer and
more shiny. Ionization function is switched on automatically
when the hair dryer is turned on.
COLD BLOW
Cold blow is used for fixing hair style. Moving air stream
strength regulation switch (4) to position – cold blow will
initiate emission of cold air from the appliance.
AIR CONCENTRATOR
Air concentrator allows to direct air stream precisely at the
desired place, thanks to which you will in an easy and fast
way dry particular parts of hair. Air concentrator is easily
affixed to the front part of hair dryer.
DIFFUSER
Diffuser allows to dry your hair easily and set a natural
looking hairstyle. Thanks to application of diffuser you will
obtain natural waves (without necessity of applying gel or
styling mousse) and the hair style will last for a longer time.
Hair drying and styling
After washing your hair dry it thoroughly with a towel.
●
Affix desired accessory to hair dryer, air concentrator or
●
hair styling diffuser (type HD1001).
Before inserting the plug into the socket make sure that
●
air stream strength regulation switch (4) is placed in
position „0”. Then plug the appliance.
If you want to quickly dry your hair place the air stream
●
strength switch (4) in position "2".
Moving air stream strength regulation switch
●
(4) to
position – will initiate emission of cold air from hair
dryer.
When hair dryer is switched on the ionisation function
●
thanks to which you will easier set your dream hair style
and your hair will remain healthier.
In order to fix the hairstyle move air stream strength
●
regulation switch (4) to position – cold blow.
After the drying is finished place the switch of air stream
●
strength regulation (4) in position "0".
After each use always unplug the appliance.
●
Immediately after the use accessories can be hot.
●
Always leave the appliance to cool down before removal
of accessories.
Safety instructions
This hair dryer is equipped with an overheating protection
device which turns off the appliance when the temperature
of the outflow air is too hot or when the air inlet is partly
blocked. If the hair dryer switches off during operation please
switch off all buttons and allow to cool. The protection device
will then automatically reset. Before using check if air inlet
and outlet is not blocked. If necessary unplug the appliance
and clean the openings. While using the appliance do not
block the openings and do not allow hair to get inside the
hair dryer.
Technical parameters
The technical parameters are indicated on the rating label.
ZELMER hair dryer fulfills the requirements of the existing
norms.
Noise level: 83 dB/A.
The appliance is in conformity with the requirements of the
directives:
Low voltage appliance (LVD) – 2006/95/EC.
–
Electromagnetic compatibility (EMC) – 2004/108/EC.
–
The appliance was marked by the CE sign on the rating
label.
Construction of appliance (Fig. A)
1
Air outlet
2
Air inlet cover
3
Net filter
4
Regulation of air stream strength switch
5
Practical handle for hanging
6
Power supply cord
7
Air concentrator
8
Diffuser (Type HD1001)
Regulation of air stream strength
0 – appliance off
1 – delicate stream of air
2 – strong stream of air
– cold blow