125
CM4003-001_v01
5
In order to clean the coffee delivering pipe, press the
pipe catch and pull it upward.
6
Wash the coffee delivering pipe under running water.
7
Dry the cleaned element before fi tting it in the
appliance.
DESCALING
Scale is a mineral build-up which naturally occurs on all
appliances connected with heating water.
Regular descaling is recommended to extend the service
life of your appliance. The
symbol appearing
on the display will signal that it is necessary to run the
descaling process.
Always descale your appliance in accordance
with the user manual. Appliance malfunctions
due to failure to descale shall not be repaired
under warranty.
1
When the machine signals that it is ready to work,
press the
button on the control panel.
2
Keep pressing the button until appears on the
LCD display.
3
Press the
button again, in order to confi rm the
selected option. The following symbol will appear on the
display.
If the water fi lter has been mounted in the water tank,
remove the fi lter (see the “WATER FILTER” section).
4
Press the button again. The following symbol will
appear on the display.
5
Fill the water tank with the citric acid solution (use
650 ml of the solution).
Proposed solution: 2 teaspoonfuls (approx.
30 g) of citric acid in one litre of water.
6
Press the
button. The descaling process will
begin.
The descaling process will take about 20
minutes.
7
After completing the above operations, the symbol
will begin to fl ash on the LCD display to remind you
that it is necessary to remove the citric acid solution from
the tank and to fi ll the tank with clean water (pour the clean
water not exceeding the MAX level).
8
After placing the water tank in the machine, the
button will begin to fl ash.
9
Now, after pressing the
button, the cleaning
process will start.
10
On completion of the descaling programme, the
appliance will return to the standby mode.
Do not unplug the machine during the
process as this may cause the citric acid to
be retained inside the machine.
WATER FILTER REPLACEMENT
The water fi lter should be replaced in the following
situations:
After each 50 litres of water used, the
●
symbol
will appear on the display to remind you of replacing
the water fi lter.
The fi lter should be replaced every two months
●
even though the machine does not remind of its
replacement.
If the machine has not been used for at least 3 weeks.
●
In order to replace the fi lter and reset the used water meter,
follow the directions below.
1
Turn on the appliance.
Summary of Contents for CM4003ALS
Page 128: ...CM4003 001_v01 ...
