39
●
Do not open the lid immediately after water has boiled
– steam might condense and appear on the exterior
of the kettle.
●
Do not place the kettle on or near hot objects.
●
Do not immerse the kettle or the power base in water
when filling or washing the electric kettle.
●
In the event that water gets into the inside electric
elements of the kettle, or onto the power base,
carefully dry these elements before plugging the kettle
into the mains.
●
Do not operate the kettle when empty.
●
Do not use the kettle with the lid open – the automatic
shut off will not work then.
●
Do not use any abrasive cleaning agents such as
emulsions, creams, pastes, etc for cleaning the kettle
body. They might remove graphic information symbols
such as: scales, marks, warning signs, etc.
●
The appliance is not intended to be operated by means
of an external timer or separate remotecontrol system.
3
Spout
4
Lid release button
5
Lid
6
Handle cover
7
Handle
8
Water level indicator
9
On/off button
10
Base of the kettle
11
Supplying cord
12
Storage space for the connecting cord
13
Antideposit filter
14
Base
Preparation of the electric kettle for
operation
Before the first use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”), fill it with water up to the “max”
level, and let it boil four times (use fresh water
each time) and wash again.
Operating instructions of the electric
kettle
1
Press the lid button
(4)
– the kettle lid will open.
2
Place the filter (
13
) in the kettle – if it was taken out
before.
3
Fill the kettle up with the desired amount of water
(the level is visible on the indicator
(8)
).
Do not boil the water if it is below the minimum
level or beyond the maximum level on the
indicator (
8
).
4
Close the lid.
5
Place the kettle on the power base
(14)
.
6
Put the plug of the connecting cord into a mains socket
with an earth pin – the upper part of the kettle body will
light up.
7
Turn the kettle on by pressing the lever
(9)
– the indicator
light will come on.
8
The kettle switches off automatically when the water
has reached the boiling point, the lever switch returns to its
starting position – the light comes off.
If further use of the kettle is anticipated, it is not necessary
to remove the plug of the connecting cord from the power
socket.
Be careful not to fill up with water beyond the
nominal capacity when pouring water into the
kettle.
B
SUGGESTION
Information on the product and
suggestions for its use
●
This appliance is intended to be used in household and
similar applications such as:
●
in shops, offices and other similar working
environments;
●
in farm houses;
●
by clients in hotels, motels and other residential
type environments;
●
in bed and breakfast type environments.
In case it is used for food business purposes, the
warranty conditions shall change.
●
Do not use the kettle without a filter.
●
The kettle type covered by this user’s manual brings
water to boil very quickly and draws up to 10 A of
current from the mains.
●
Check that the mains fuses used can cope with this
level of power consumption. While boiling water,
unplug all other appliances from this circuit.
Technical data
The technical parameters are given on the data plate of the
product.
1.7 liter capacity.
This device complies with Commission Regulation (EC)
no. 1275/2008 on ecodesign requirements.
Structure of the kettle
1
Control light
2
Metal casing
A
17Z018-001_v06
Summary of Contents for 17z011
