Zelmer 17z011, User Manual

Page: 36 / 36

40
Ecology – environment protection
Each user can protect the natural environment.
It is neither difficult nor expensive.
In order to do it: put the cardboard packing into
recycling paper container; put the polyethylene
(PE) bags into container for plastic.
When worn out, dispose the appliance to
particular disposal centre, because of the dangerous
elements of this appliance, which can be hazardous for
natural environment.
Do not dispose the appliance with the municipal waste!
In the event that an empty kettle is switched
on, it will be switched off automatically by
a thermal device.
To switch on the kettle after it has cooled down
(about 15 min), remove it from the base, fill with
water, replace on the base and switch on by
pressing the switch (9). The cooling down of
the kettle can be accelerated by pouring cold
water into the kettle.
Cleaning and maintenance
Always clean a cold kettle!
1 Remove the plug of the connecting cord from the power
socket.
2 Take out the filter (13) .
3
Clean the outside surfaces with a soft cloth moistened
with washing­up liquid.
In order to remove the build­up of hard water film from the
outside and inside walls of the kettle, wipe them with a cloth
moistened with vineger.
4 Rinse the kettle with fresh water.
Various black-coloured, rusty, milky, etc.
deposits may form inside the kettle and float on
the water. This is caused by minerals occurring
naturally in water (calcium, magnesium, iron,
etc.). Such discoloration is not caused by faulty
operation of the appliance and does not affect
its use. In case of substantial accumulation of
mineral deposits, proceed as described in the
“Descaling” section.
Descaling
In the event that scale builds up on the bottom of the kettle,
it needs to be removed. For this purpose use 6­10% vinegar
or citric acid.
●
Open the lid (5) .
●
Add 0.5 l of vinegar or 40 g of citric acid and fill the kettle
with water up to the maximum level. Switch on the kettle.
●
Bring the mixture to boil and allow the kettle to stand for
30 minutes.
●
Empty the kettle and rinse it with fresh water.
●
Remove the filter (13) and rinse it under running water.
Replace the filter.
●
Fill the kettle with fresh water, boil the water and empty
the kettle.
●
If sediment is still visible in the kettle, remove it with
a sponge and rinse the kettle again. If unsuccessful,
repeat the descaling process.
Negligence in descaling the kettle may results
in its damage.
C
The manufacturer does not accept any liability for any damages
resulting from unintended use or improper handling.
The manufacturer reserves his rights to modify the product any time
in order to adjust it to law regulations, norms, directives, or due to
construction, trade, aesthetic or other reasons, without notifying in
advance.
17Z018-001_v06