![background image](http://html1.mh-extra.com/html/zeka/lp/lp_programming-manual_3301653007.webp)
User’s Manual
7
ZEKA LP
2.4. PAPER LOADING AND REPLACEMENT
ZEKA LP
controls availability of paper roll, and if paper roll is missing the
printer blocks.
To continue the work following steps must be accomplished:
Open the printer cover using the handle;
To load new label roll it is necessary to remove
completely the old one;
The new roll must be cleared from overlay folio and
then put in the roll nest with labels inside;
The free end of paper roll must be pulled to position so
it can be set by the printer cover;
Close the printer cover and keep the end of the paper.
After that the printer continues any unfinished jobs.
ATTENTION!!! When loading paper roll, do not touch the
thermal printer head of the printing mechanism. It may
cause permanent damage or may cause irregular printer
work
.
• Paper roll requirements:
Type:
Thermal sensitive
Width of paper roll:
57 + 0/-1 mm
Roll lift:
60-75 μm
Roll diameter:
65 mm or less
Thermal sensitive layer:
outer