![background image](http://html1.mh-extra.com/html/zeka/lp/lp_programming-manual_3301653012.webp)
User’s Manual
12
ZEKA LP
•
Choose type, position, size and direction of the barcodes, if any. Also
modification operators can be used when necessary.
•
If necessary, by commands (X, LE, LO, LW) draw lines and frames.
•
To end the form, add command (FE).
•
After sending the ready command text line to the printer, the form is
loaded in the memory and ready for print - by (FI) command.
•
Activate the form by command (FR), and by (?) command from terminal
program set values for counters and variables.
•
Print the ready form by (P) command.
All graphics, fonts and forms share common memory in
ZEKA LP
. For
example if store more graphic information the printer will have less space for
forms and fonts, and vice-versa. The maximum length of single label is
determined by the graphic buffer of the printer (1200x384 dots). According to
the printing width (command q), the maximum length is subject of change.
When printing continuously large amount of labels, especially if they are
darker, you should be careful because the thermal head heats up. That’s why it’s
recommended printing of large amount of darker labels to be done in smaller
sets.