![background image](http://html1.mh-extra.com/html/zeka/lp/lp_programming-manual_3301653019.webp)
User’s Manual
19
ZEKA LP
When printing on label paper, determination of the space between labels is
done automatically by the paper sensor. Only one form is printed on single
label. In cases when set size of printing area is larger than the label size the
remaining information is not printed. When the size is smaller than the label,
the free space remains empty.
When printing on paper roll is assumed that the size of printable area is
same as the label size.
Example
:
Q240,40
Label length 30 mm, black stripe 5 mm
7.1.4. SET PAGE WIDTH
Set horizontal size of the printable area.
format:
qm
m
is the page width. Allowed value is from 10 to 384.
Example
:
q384
7.1.5. SET STARTTING POINT
Set co-ordinates starting point. The command can be used repeatedly. The
graphic objects created after its use will contain the additional displace along X
and Y co-ordinates.
format:
Rm,n
m
is horizontal displace. Allowed value is between 0..2047.
n
is vertical displace. Allowed value is between 0..2047.
Example
:
R24,24
Sets starting point with displace with 3 mm along X
and Y.