background image

Standard 25 

ICS

B 40-029 e   01/98

3-1

OPERATION

Contents

3 OPERATION ...................................................................................................................3-3

3.1 

Switch on the instrument.................................................................................................3-3

3.2 

Setting of transmitted-light brightfield for KÖHLER illumination ........................................3-4

3.3 

Setting of transmitted-light phase contrast .......................................................................3-6

3.4 

Setting of transmitted-light darkfield................................................................................3-8

3.5 

Setting of transmitted light polarization contrast ..............................................................3-9

3.6 

Measurement of lengths ................................................................................................ 3-10

3.7 

Attachment of photomicrography equipment................................................................. 3-11

3.7.1 

Attachment of SLR camera, e.g. CONTAX 167 MT ......................................................... 3-11

3.7.2 

Attachment of MC 80 DX microscope camera (35 mm film cassette) .............................. 3-13

3.8 

Attachment of adapters for video cameras ..................................................................... 3-14

3.9 

Insertion of 8x drawing eyepiece .................................................................................... 3-16

List of illustrations

Fig. 3-1 

Switch on the instrument.................................................................................................3-3

Fig. 3-2 

Insertion of filters.............................................................................................................3-3

Fig 3-3 

Setting of brightfield........................................................................................................3-4

Fig 3-4 

Setting of interpupillary distance of binocular tube ...........................................................3-4

Fig 3-5 

Setting of diaphragm images according to KÖHLER ..........................................................3-5

Fig 3-6 

Setting of phase contrast using condenser 0.9 Z ..............................................................3-6

Fig 3-7 

Centering of phase stops in phase contrast ......................................................................3-7

Fig 3-8 

Setting of phase contrast using Ph condenser II Z 0.9........................................................3-7

Fig 3-9 

Setting of polarization contrast ........................................................................................3-9

Fig 3-10 

Measurement of lengths ................................................................................................3-10

Fig 3-11 

Attachment of SLR camera, e.g. CONTAX 167 MT ......................................................... 3-11

Fig 3-12 

Attachment of MC 80 DX microscope camera................................................................ 3-13

Fig 3-13 

Insertion of 8x drawing eyepiece  ................................................................................... 3-16

Summary of Contents for Standard 25 ICS






























































Reviews: