![background image](http://html1.mh-extra.com/html/zeiss/standard-25-ics/standard-25-ics_operating-manual_3461523028.webp)
Standard 25
ICS
2-8
B 40-029 e 01/98
2.8
Connecting the instrument to the line
Check whether the voltage indicated at the rear of the instrument complies with the line
voltage!
Do not connect the instrument to the line if the instrument voltage and the line voltage are not
identical and make sure to inform the nearest CZ agency or CZ service agency.
Connect the line cable with connector (2-9/
4
) to the instrument socket (2-9/
3
) and connect the earth-
contact plug (2-9/
5
) to the line.
Switch on the instrument via the on/off switch (2-9/
2
) on the instrument rear.
The green LED (2-9/
1
) lights up to indicate that the instrument is ready for operation (on/off switch in
"I" position), and the integrated halogen lamp must also be on.
Fig. 2-9
Connecting the instrument to the line
Summary of Contents for Standard 25 ICS
