ZEISS
3 Applicable Standards and Regulations
3 Applicable Standards and Regulations
Observe all general and country-specific safety regulations as well as applicable environmental
protection laws and regulations.
The Microscope System is in compliance with the requirements of the following regulations and
directives:
EN 60825-1
Safety of laser products - Part 1: Equipment
classification and requirements
2011/65/EU
RoHS Directive
2014/30/EU (EN 61000-6-2)
EMC standards KN 61000-6-2, KN 11
Electromagnetic Compatibility
2014/35/EU
Low Voltage Directive
EN 55011
Noise emission according to CISPR 11
intended use in industrial environment
EN 61010-1
Safety requirements for electrical equipment
for measurement, control, and laboratory use
– Part 1: General requirements
EN 61326-1
Electrical equipment for measurement, con-
trol and laboratory use - EMC requirements -
Part 1: General requirements
Unauthorized modifications of the Microscope System will cancel this declaration.
The product and its accessories have been classified as instrument category 9 (laboratory equip-
ment or comparable standard). The product and its accessories comply with the EU-regulations
2011/65/EU (RoHS) and 2012/19/EU (WEEE), as applicable for the product.
In addition to the European and international guidelines and standards, the 21 CFR §1040.10:
"Performance Standards for light emitting products - laser products" applies for the USA.
The following EMC user notice is for Korea only:
기종별
사용자안내문
A
급기기
(
업무용방송통신기자재
)
이기기는업무용
(A
급
)
전자파적합기기로서
판매자또는사용자는이점을주의하시기바라
며
,
가정외의지역에서사용하는것을목적으
로합니다
.
European and International Directives / Standards: For more information on ISO and CSA certifi-
cates, CE Declarations of Conformity, see
https://www.zeiss.de/mikroskopie/downloads.html
contact your ZEISS Sales & Service Partner.
ZEISS works according to a certified Environment Management System according to ISO 14001.
The product was developed, tested and produced in accordance with the valid regulations and
guidelines for environmental law of the European Union.
ZEISS introduced a procedure for the return and recycling of the instruments within the member
states of the European Union which ensures suitable recycling procedures conforming to the EU
directives.
For more information on disposal and recycling please consult your ZEISS Sales & Service Partner.
The product may not be disposed of in the household waste or through municipal waste disposal
services. If the product is resold, the seller shall be obliged to inform the buyer that the product
must be disposed of in accordance with the regulations.
Installation Requirements ZEISS LSM 900 | en-US | Rev. 2 | 349500-8183-000
19
