background image

 
 
 
 
 
 

INTRODUCTION TO LASER SCANNING MICROSCOPY 

LSM 510 

Carl Zeiss 

Performance Features of the LSM 510 

LSM 510 META 

 

 
3-10 

B 45-0008 e   10/02 

(5) Imaging optics 

Optovar sliders cannot be used. 
The analyzer for the conventional DIC mode will be operated from the right side and is located just 
below the nosepiece. 
Use of sliders with auxiliary objects (473704/14-0000-000) is not possible. 

 

(6) Photo equipment 

The stand does not feature an integrated SLR-port, but microscope cameras as described in the Axiovert 
operation manual can be used. 

 

(7) TV adaptation 

The TV port at the side and the tubes can be used as described in the Axiovert operation manual. 

The TV interface side port or base port can be used with TV adapters 44 or LSM adapters. 

 

 

3.4.3 

Computer Hardware and Software 

The LSM 510 is controlled via a standard high-end Pentium PC. Linking to the electronic control system is 
made via an ultrafast SCSi interface. The PC comes with the 32-bit WINDOWS NT 4.0 or WINDOWS 
2000 operating system. 

The instrument is fully motorized, permitting fast change-over between methods as well as automatic 
operation. Parameters once set or complex examination sequences once established can be saved and 
reproduced; therefore, complete application programs can be loaded and performed by pushbutton 
control.  

The software of the LSM 510 has two levels. On the simple operator interface level, a result will be 
achieved after a few prompts; graphical prompting of the user in conjunction with automatic setting of 
many parameters is an ideal tool for daily routine jobs. The expert level offers perfect facilities for 
individual settings of functions and parameters.  

Conversion of the light signals into a digital image is effected by means of four 12-bit A/D converters, 
each of which can generate 4096 brightness levels.  

The software provides an enormously wide range of image processing functions, including all standard 
2D/3D (stereo, projection) functions identical to sophisticated 3D reconstruction capabilities (surface and 
alpha rendering), digital processing of voxels and 3D measurement functions (surface areas, volumes). 

As all files and images are recorded in MS Access databases, elegant image database editing is just as 
easy as transferring the records to other programs.  

Summary of Contents for LSM 510 META













































































Reviews: