Zeiss i.Profiler plus User Manual Download Page 6

Page: 6 / 66

Notes on the user manual

000000-1520-928_GA_EN_021013

Explanation of symbols used

The symbols used in this user manual refer to important safety information.

They warn against possible health risks or fatal danger and contain useful

notes. Whenever you see these symbols, please read the respective

information carefully and observe all safety notes and information

appropriately marked in the user manual and on equipment labels.

WARNING

Indicates a hazardous situation which may result in fatal or serious bodily

injury if the appropriate safety precautions are not heeded.

CAUTION

Indicates a hazardous situation which may result in minor injury if the

appropriate safety precautions are not heeded.

CAUTION - PROPERTY DAMAGE

Indicates possible device damage if the respective safety precautions are not

heeded.



Information, hints, and advice for a better understanding of the

instructions to be observed in the operation of the device.

Summary of Contents for i.Profiler plus



































































Search results

Summary of Contents for i.Profiler plus

Reviews:

Related manuals for i.Profiler plus

Brands by name

Popular brands

Zeiss i.Profiler plus, User Manual

Search results

Summary of Contents for i.Profiler plus

Reviews:

Related manuals for i.Profiler plus

Brands by name

Popular brands