Installation
000000-1520-928_GA_EN_021013
30
Requirements made on the NAS device
The NAS device must have the following features to guarantee safety and
acceptable performance in use of the i.Profiler
® plus
:
•
Support of 100BaseT or 1000BaseT Ethernet. For safety reasons a USB
connection is not permissible with the i.Profiler
® plus
.
•
Crossover cable or a non-crossover cable with a crossover adapter for
direct connection to the i.Profiler
® plus
:
UTP CAT5e cable with an RJ-45 jack, at least 3 m long, so that the NAS
device can be located outside the reach of patients (see above safety
precautions).
Recommendations for the NAS device
•
Storage capacity: Should be at least as large as the storage capacity of
the i.Profiler
® plus
hard drive.
•
Data storage: To ensure unlimited redundancy in data backup, we
recommend using data backup software of your choice for the NAS
device.
•
Several NAS devices may be used for data backup. However, when two
or more NAS devices are used simultaneously, a switch or router will be
required. The switch/router may be connected directly to the i.Profiler
® plus
or another point in the LAN. The user is responsible for the configuration.
