Installation
000000-1520-928_GA_EN_021013
33
Connecting the NAS device via an existing network
•
With the i.Profiler
® plus
and NAS device switched off connect the NAS
device to the practice network (LAN) in which the i.Profiler
® plus
is located.
Detailed instructions on how to install the NAS device are provided in the
manual accompanying the NAS device.
Observe the safety precautions and requirements regarding cable
type and length.
•
Switch the NAS device on and wait until initialization has been completed
before switching on the i.Profiler
® plus
. A light at the front of the NAS
device often indicates by a change of color that initialization has been
completed. For more detailed instructions see the manufacturer's
operating manual.
•
Switch the i.Profiler
® plus
on. After the start, quit the i.Profiler
® plus
software by pressing the
Close Application
button in the
Shut Down
and switch to the Microsoft Windows desktop (administrator
rights required). The LAN connection may be indicated in the task bar
bottom right when the NAS device is connected. Ignore this message for
the time being.
•
Open Windows Explorer. Enter the signs "\\" followed by the IP address
or the name of the NAS device
in the field
Address
. Confirm with
Enter
.
The released directories of the NAS device are shown.
•
Select an existing folder or create a new folder to which the data from
the i.Profiler
® plus
is to be saved.
•
Open the Tools menu from the menu bar. Select
Map Network Drive…
The
Map Network Drive
dialog appears.
•
Select a free drive letter in the
Drive
field.
•
Click the
Browse...
button, the dialog
Browse For Folder
appears.
Select the path to the folder in which the data will be saved. You can
enter this path directly in the
Folder
field. Select
Reconnect at logon
.
•
Confirm the entries by clicking on
Finish
.
•
If required, the user name and password of the user account previously
generated on the NAS device must be re-entered.
•
Double-click on the
Save Configurations
program icon on the Microsoft
Windows desktop to save the new configuration. The device will restart.
