Installation
000000-1520-928_GA_EN_021013
27
Connecting the printer to the i.Profiler
® plus
directly
(peer-to-peer)
•
Connect the network printer or printer server with the i.Profiler
® plus
using
a crossover cable or a standard cable with a crossover adapter.
•
Switch on the i.Profiler
® plus
and the printer or printer server.
•
Configure the network printer or printer server with the aid of the user
manual provided with the device as follows:
IP address:
192.168.103.6, if using the right network connection
and 192.168.100.6, if using the left network
connection of the i.Profiler
® plus
, see page 22
(
1
Subnet mask:
255.255.255.0
Standard gateway: 0.0.0.0
•
In the
Settings
-
Maintenance
window (see
Software description
of the
i.Profiler
® plus
), select
the
Printer configuration
option (administrator
privileges required). The
Message
dialog will open.
Confirm with
Yes
. The
Printer Setup
dialog for configuring the printer
appears.
•
Press the
Add New Printer
button. The
Printer Configuration
dialog
appears. Follow the prompts appearing on the screen.
•
Enter the IP address which has been set on the network printer or printer
server.
•
Press the
Test
button. When the connection is successful, a green check
mark will appear.
•
Confirm the selection with
Finished
. The printer appears in the list of the
Printer Setup
dialog.
•
Press the
Properties
button. Ensure that the
Portrait
print format is set.
•
Press the
Print Testpage
button. A test page will now be printed to
confirm that the printer has been installed successfully.
•
Press the
Close
button, in order to close the
Printer Setup
dialog. The
device will restart.
