7 Installing Software and Drivers | 7.1 Installing software on PC
ZEISS
7 Installing Software and Drivers
7.1 Installing software on PC
To acquire images with the camera(s) on a PC, you must install ZEISS software (e.g. ZEN or Lab-
scope ). You will find the installation files on the USB flash drive delivered. The camera drivers are
also installed during the software installation. The latest version of ZEISS software products can be
downloaded from our web page:
http://www.zeiss.com/microscopy/int/downloads.html
Prerequisite
ü
The camera is connected to the PC.
Procedure
1. Install the software according to the installation guide delivered with the software.
2. To install the camera drivers, confirm the corresponding prompts that are displayed during
the software installation process.
3. When the installation is finished, restart your PC.
4. In the device manager of your PC, verify that the installation was successful.
Info
For information on how to acquire images with the specific software, please refer to the re-
spective software manual.
7.2 Installing software on iPad
Procedure
1. From your iPad, go to the App Store and search for “Labscope” by ZEISS.
2. Follow the instructions on your iPad to install the app.
38
Instruction Manual ZEISS Axiocam 208 color / 202 mono | en-US | Rev. 4 | 426570-7011-001
