ZEISS
5 Connecting the Camera | 5.3 Connecting the camera to the power supply
5.3.1 Powering the camera via microscope
NOTICE
Risk of damage to the microscope or the camera
4
Always switch off the microscope before you disconnect the power cable from the cam-
era!
Prerequisite
ü
The camera is mounted to Axioscope 5/7 or Axiolab 5.
Procedure
1. Insert the Micro-D plug of the power cable into
the Micro-D port of the camera.
2
2. Insert the power cable's opposite connector
into the corresponding socket on your micro-
scope.
Info
Refer to the instruction manual of your microscope for further information.
5.3.2 Powering the camera via mains supply
Prerequisite
ü
The power supply has been adapted with the appropriate country-specific adapter.
ü
The camera is not already powered via a compatible microscope.
Procedure
1. Insert the Micro-D plug of the plug-in power
supply into the Micro-D port of the camera.
2
2. Insert the power plug of the plug-in power sup-
ply into a power outlet.
3. Turn on the camera via cable switch.
Instruction Manual ZEISS Axiocam 208 color / 202 mono | en-US | Rev. 4 | 426570-7011-001
23
