Zeiss Axiocam 202 mono, User Manual

Page: 36 / 52

6 On Screen Display (OSD) menu | 6.3 Settings menu ZEISS
No. Name Description
4
Image Orientation con-
trols
Sets the image orientation.
§
0° : original image orientation
§
Mirror vertical : image mirrored in vertical direction
§ Mirror horizontal : image mirrored in horizontal di-
rection
§
180° : image rotated by 180°
5
Show Scale Bar button Shows a scale bar on the live display.
Please note:
The scale bar will also appear in the captured image.
6
Show Image after Snap
button
If activated, the image is shown on the full display for 5
seconds after being captured. The full display image
can be closed or minimized to a thumbnail, if required.
7
Smart Snap Mode but-
ton (for Axioscope 5/7
and Axiolab 5)
Activates the triggering of a multi-channel acquisition
by pushing the snap button on the camera or micro-
scope stand.
Please note:
The Multi-Snap function requires that the camera is
connected to a compatible microscope stand (correct
light source and appropriate multi-band filter set). See
the corresponding microscope user manual for details.
8
Optimize HDR button
(for Axiocam 208 color)
Converts several images with different exposure times
into a high contrast image or High Dynamic Range
(HDR) image in order to show large differences in
brightness (e.g. reflective samples) in detail.
9
Optimize Sharpen but-
ton
Sharpens details.
6.3.2 Microscope System menu
The Microscope System Settings menu provides access to some microscope configurations to
be adjusted for easier imaging. For example, the microscope information can be updated if a new
part is installed. If required, a configuration wizard guides through the entire configuration setup.
1
2
3
4
5
Fig. 10: Microscope System Settings menu
User Guide ZEISS Axiocam 208 color / 202 mono | en-US | Rev.1 | 426570-7011-001 36