5
1.4 Range of application
The pump stations of the type series FPS-K (A) are used for the disposal (collection and conveyance)
of domestic and industrial wastewater which accumulates below the backwater level of the canal.
They are used outside of buildings.
1.5 Scope of supply
The prefabricated pump station FPS-K (A) is delivered completely with:
-
Screwless coupling system
-
Gate valve DN 50
-
Check valve DN 50
-
Complete pressure pipe with fittings
-
Rinsing connection prepared, sealed by means of a plug
-
Submersible motor pump DN 50 (see separate operation manual)
-
Pneumatic level control system (see separate operation manual)
-
Variable attachment piece with lip seal
-
BEGU
– manhole cover class A (walkable) (class B or D optionally available)
2. Safety:
(from:
“VDMA sheet 24 292“)
The operation manual at hand provides basic notes which have to be taken into account during
assembly, operation and maintenance works. Therefore, before assembly and commissioning, this
operation manual has to be read by the assembler as well as by the responsible personnel/operator
at all costs. It always has to be available on site of operation of the machine/plant.
The general safety notes listed under the main point safety are not the only notes to be taken into
account. Please also observe the specific safety instructions, such as those for private use, listed
under other main points.
2.1 Marking of the notes contained in the operation manual
The safety notes contained in this operation manual which can cause danger to persons are
specifically marked by the following general danger symbol:
Safety sign according to DIN 4844 - W 9,
The following symbol warns against dangers caused by voltage:
Safety sign according to DIN 4844 - W 8
